JFK3rd Posted July 2, 2013 Report Share Posted July 2, 2013 I seem to have a couple of leaks in my 98 Sovereign. I haven't gotten too I depth with it but, my common sense conclusion is they are coming from jets due to the water trickling out from right below where 2 separate jets are located. I am losing about 1.5" of water a week so it's not horrible, but I'd like to fix it. I drained the tub partially and removed the jet and housing insert to one of the suspected spots and was thrilled to find that I will probably have to buy a special tool to remove the jet housing to inspect the o rings. Just thought I'd ask if anyone had an idea of where I could fine such a tool or better yet a way to remove them no specialty tool required. Any help would be greatly appreciated. Quote Link to comment Share on other sites More sharing options...
Hot Spring Official Posted July 2, 2013 Report Share Posted July 2, 2013 Hi JFK3rd! There are two tools recommended to assist with jet housings: Spanner Wrench (part# 10057) and Nozzle Tool (part# 70830). I'd also recommend giving your local dealer a call to consult with their service team if needed! Or call us direct at 800-999-4688 anytime. Thanks, Steve ---Hot Spring Spas--- Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.