Terrig7791 Posted October 3, 2012 Report Share Posted October 3, 2012 Recently had my salt cell (t15) go bad. Purchased a new (t-cell-3) not realizing that my main control unit firmware revision was 1.4. Is it possible to upgrade the firmware? Is it a board replacement inside of the main unit? Is there anything I can do short of having to purchase a new control unit? Any insight would be greatly appreciated! Thanks. Quote Link to comment Share on other sites More sharing options...
LegsOnEarth Posted October 3, 2012 Report Share Posted October 3, 2012 If you can get a refund on the product, that would be ideal. The T-cell-3 is rated to chlorinate 25k less gallons than the T-Cell-15 (15k vs. 40k). Even if you were to get the system up and running, it is unlikely that it would be able to perform even marginally as well as your previous cell, and will most likely burn itself out very quickly (if it can manage to sanitize the water at all). Sorry for the negative news. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.