kellysdmax Posted August 18, 2012 Report Share Posted August 18, 2012 Hi guys im new here need some help if anyone can I bought a used hot tub and bought a new balboa vs501z Retro spa pack for it but the problem is i ordered the wrong one i needed the one with two pumps and a blower with light and ozonator i hooked it up with no problems and it works fine. My question is is their any way to hook up the blower and the two pumps so that i can run all three. It all uses 220. thanks any help would be appreciated Quote Link to comment Share on other sites More sharing options...
Kenny W Posted August 19, 2012 Report Share Posted August 19, 2012 Balboa does make what is called a daughter board that mount to the heater for a extra pump or blower, but if this control system can use it you will still need to buy a new topside control to operate it. The other alternative is a air button connected to a switch to turn the blower or pump on and offf. here is the switch http://www.spadepot.com/shop/Air-Switch-SPDT---301-P816C158.aspx air button http://www.spadepot.com/shop/Air-Button---Flush-Mount---White-P4586C153.aspx Quote Link to comment Share on other sites More sharing options...
kellysdmax Posted August 20, 2012 Author Report Share Posted August 20, 2012 Hey thanks for the info i do have three top side controls so i should be good to go if i can get that board thanks again. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.