norts Posted March 24, 2012 Report Share Posted March 24, 2012 Just did a water change on my 2005 bullfrog dual-pump spa and now I'm having issues. Turned power back on to spa after water change and control panel was operating normally. Came back two hours later to find the temp had risen only 3 degrees. I tried to push the 'temp up' button but found none of the buttons would work. I turned the breaker off for 10 minutes to see if that would reset it but no luck - still dead. Only now there is no temp being displayed, the F1 and PL lights are on and the pump is circulating. Any help on this is greatly appreciated! Thanks in advance, Norts Quote Link to comment Share on other sites More sharing options...
BullfrogSpaParts Posted April 4, 2012 Report Share Posted April 4, 2012 Norts, Your spa is in "Panel Lock". Look here at the manual for your 2005 Bullfrog Spa on page 27 for the instuructions on how to turn this off. http://bullfrogspapa...rs-manual-2005/ If you still have issues check out our troubleshooting guides here: http://bullfrogspapa...-bullfrog-spas/ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.