Bigun Posted February 13, 2012 Report Share Posted February 13, 2012 Has anyone seen this problem? My aqua rite generator will cut on -- the power light will be lit as well as the generating light. After about 15-20 seconds, the unit will lose power. It will stay off 20-30 seconds, then power back on . The green power light and the green generating light will be lit w/ out blinking. The unit will act like it wants to generate but will lose power again after a few seconds. This issue will then start all over again. I have cleaned the cell as well as the filters in my Jandy filter. The display in the unit shows all readings correctly, ppm of salt, etc. Pool guy seems to think that the issue lies in the cell. Does this make since? I am open for any help. Thanks, Bigun Quote Link to comment Share on other sites More sharing options...
Backyard Pool & Spa Posted February 13, 2012 Report Share Posted February 13, 2012 If the unit is losing power, it is an issue within the Power Center/Control Box, not the cell itself. Suggest replacing the board inside the power center. you can put a multimeter on it to confirm it is actually losing power when the lights shut off. Careful, electricity can hurt ;P Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.