Yalck Posted October 21, 2010 Report Share Posted October 21, 2010 I have a Hot Springs Jetsetter Model J. It is 7 years old. Replaced the heater and circulation pump in Dec 09. Spa worked fine. Drained spa in Apr and did not use again until last week of Sept 10. Spa worked fine until a heavy usage weekend by 5 family members. Ran the clean cycle several times and now the heater keeps tripping past 95 degrees. I have replaced all 3 filters, reset the high heater limit and restarted the spa. The green light continues to flash as soon as I raise the temp past 95 degrees. Any suggestions. Quote Link to comment Share on other sites More sharing options...
NccPools Posted October 21, 2010 Report Share Posted October 21, 2010 When you drain a spa for long periods it tends to dry up and certain parts want to crack on you. try leaving the filters out completly. If the heater will not go past 95 then replace the element. Is this a 110 system or 220 volt Quote Link to comment Share on other sites More sharing options...
Yalck Posted October 22, 2010 Author Report Share Posted October 22, 2010 When you drain a spa for long periods it tends to dry up and certain parts want to crack on you. try leaving the filters out completly. If the heater will not go past 95 then replace the element. Is this a 110 system or 220 volt Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.