JoeP1871

I had a pool pump motor with centrifugal switches. No brushes to replace. The shaft of the motor wouldn’t spin when I turned it on. Just the low pitched hum of the capacitor trying to push power somewhere. I was afraid I wouldn’t be able to find a new one because of supply issues let alone having to replace it in the middle of the summer and being forced over a barrel. Actually got a pretty good deal on the last one in stock at the store we got the pool from. But yeah. 17 yrs.? You don’t have anything to complain about. 🤣

We purchased a cover from The Cover Guy earlier this year. First one arrived damaged. By the time we received the replacement, we were just using the damaged cover and taking it on and off and setting it on the patio. I wished I had taken pictures of the original Hot Springs cover with the cradle, lift arms attached to the back plate. When I went to mount the cradle lift arms to the back of the new cover, the pivot brackets did not land on the mounting plate inside the cover. I work as a tool and diemaker in a well equipped toolroom. I fabricated new brackets out of aircraft grade aluminum with the pivot hole offset another 3/4 of an inch so that the mounting holes would land on the plate. The only way this could have happened was if my old cover was only an inch and a half thick? I will try to attach a couple of photos showing the two brackets. If there’s anyone out there that could answer this question for me, I would greatly appreciate it. I even spoke to the gentleman who did my original installation three years ago, and he couldn’t answer this question for me. They work great by the way. I plan on making a new set and giving them a more finished look. Black Oxide or electro plating them with something to survive a more caustic environment.