alexis_taylor153

Hello! I recently had to replace the spa pack in my Dynasty Spa. Before replacing the spa pack, my pump 1 was a two speed pump, and pump 2 was a one speed pump. After installing the new spa pack, my spa is acting as if it’s programmed to be a single pump spa. Pump 1, when pressed only turns on and off, no high or low speed. Pump 2 will not turn on at all, nor does the top side controller seem to register that the button is being pressed. ANY help would be appreciated!!! Thank you!!

I just want to say THANK YOU for this!!!! I was having the same issue and didn’t wanna shell out the $600 for a new spa pack. I’d spend HOURS on HOURS researching and couldn’t find anything until I found your post. I immediately unsoldered and soldered in a new capacitor and my tub is running BEAUTIFULLY!!!!! Thank you so much!!!!!