nickrides
-
Posts
27 -
Joined
-
Last visited
Posts posted by nickrides
-
-
Friends
I've got a brand new brown Naugahyde like cover.
A roofer dropped a piece of metal on it and put about a 1" tear and dent in it.
Any advice on how to fix it?
He has no insurance
TIA
Nick
-
A New circ pump fixed it
Nick
- 1
-
I ordered a new pump
Will confirm this was the problem
Nick
-
Gents
Went away for a few days and when I got back my spa had tripped the main breaker in the panel.
I pulled the plugs one by one to the 2 jet pumps, ozinator and recirc pump and when I pulled the recirc pump plug the breaker would hold with the control panel on and flashing.
Has my recirc pump likely gone bad?
It has 2 round prongs and a flat prong on the plug
Can I test it by ohming it out?
What else?
Thanks in advance as always!
Nick
-
I'd get a shopvac and set it up to suck and then put the suction hose on each jet under you feel it running dry
Nick
-
OK
Thanks for that CST
Nick
-
Gents
I switched from Clorine to Bromine and like it .
Then I saw a blurb about Bromine being banned in Canada due to some issue.
Is this true or internet BS?
Thanks in Advance
Nick
-
Thank you for the bets CST
Nick
-
Gents
Newbie here
As the title sez, what's the best way to clean my filters?
Thank in advance
Nick
-
CST
Thanks for that !
I Think I got it fixed.
The wire from the flow sensor was damaged and I cut it out and Now it seems to work
Temp is coming up and no flashing lights
Whahoo
Nick
- 1
-
Yes I had the 3 dots flashing
Nick
-
-
-
Bump
Nick
-
Gents
Nwebie here.archive (3).zip
I left for 2 weeks and came back and my above spa had no heat and was a bit frozen. 1/16 inch of Ice on top, circ pump not running.
I drained it and sucked all the water out with a shopvac through the jets.
The Circ pump had Ice in it. I took it out, thawed it out and plugged it in and turned on the power for a minute and it runs.
So I think it may be the heater. See attached pics please. How do I check it and if bad where can I buy one?
Why would the circ pump shut off if it's running now?
Sorry for all the pictures, I can't see on my end what's there
Nick
archive (2).zip archive (1).zip archive (1).zip archive (3).zip
-
Maybe it's just me but i wouldn't rip anybody a new A$$hole. They didn't package anything, they just sold it.
- 1
-
CSP
Thanks to you I got it fixed.
Spa care sent me 3 wrong controllers, but I finally got the correct one, the one you speced and it plugged right in and worked!
Thank you !!
Nick
- 1
-
CST
I ordered the top controller
When I get it installed I'll let you know what happens
Thank YOU!
Nick
- 1
-
-
CST
Thank you
I will get a photo up tomorrow!
Nick
-
CST
Whats the Spa Pack?
The Main power box with the boards?
Where the 220v hooks in?
Nick
-
-
I'm in Telluride Colorado
-
A short Video
Thanks !
Nick
Cover tear repair options
in Portable Hot Tubs & Spas
Posted
CST
Thanks for the response!
I did not know you could just purchase a new skin.
Nick