I have a 2018 Sundance 680 Series Peyton hot tub/spa.
it has a leak somewhere in the lower part. I can partially fill and eventually water starts coming out onto the concrete. The challenge is the entire bottom appears wet as I started removing some insulation.
any tricks to to using food dye or some other trick? I am contemplating removing all insulation from the bottom 4-6 inches until I find some wet insulation.
pump and heater connections are dry.
I am feeling very overwhelmed as I am unsure where to start.
attached is a photo of the level where it usually stops but I think it may be a hose and not necessarily a jet. I will work to expose the lower jets from the back but so far they are all dry.
any tips to help this project would be greatly appreciated.