Ndx
-
Posts
41 -
Joined
-
Last visited
Posts posted by Ndx
-
-
Hi all…
I just noticed 2in scratch at the bottom of my hot tub… I guess little pebble or gravel got in
I can feel and see it … since my tub is dark and scratch is white.
should this be addressed with one of those acrylic scratch repair fillers or I just need to ignore it ?
thank you
-
Hi
What do you guys recommend to customers during winter pump failures ..
where I am it can get as low as -30C
tub with questionable temp I assume can drop pretty fast …
options, add **** load of anti freeze and mix
drain and try to winterize
drop heating element in tub ( how safely to not melt acrylic )
put 2 service lights in cabinet 100w bulbs ? ( does this actually work ? ) -if it does I might permanently add 2 lights and wire switch on outside of the cabinet, place on each corner ?
Has anyone retrofitted circulation pump ?
would that be hard ?
currently my tub has 2 x 2 Speed pumps and it uses speed one for circulation
thx guys !
-
Sorry RD I was talking about electric pergola made by Covana
-
Hi Guys,
I know that we have multiple amazing techs here!
Did any of you installed the Covana ?
I have picked up used one, got it up and running, but manual says to not adjust the limit switch for the lowering value !?
( factory set )I’m just worried that it will crush tub going to low ?
thanks
-
Hi Guys,
Going to digg 4 inches of soil... And compact 3/4 stone and on top frame ...
Should I use 6x6 PT or 4x4 PT ?
I will esentially frame a patio that will sit on gravel
Thx !
-
Hi Guys,
How do you feel about Frog @ease. And no CYA
Thank you
-
Hi Guys,
When ALK is to low ... I know we aim for 50, but even at 50 my pH goes up over 8 after one use.
Is 40 safe for Acrylic spa.
Thank you
-
Lowered to 7.6 and maybe there is actually more...
I wonder if this the calcium sterate. Issue with pipes.
I have some Seakler comming tomorrow will see if it helps.
-
Hi Guys,
This is fresh fill after purge with Ahh Some, Tub was flushed with pure water and filled.
I only used DryAcid and Dichlor no soak time yet.
pH 7.8-8
ALK 60-70
CH 90
Tested with Taylor Kit
Every time I turn jets on and stop them, my water looks like in pictures, 5 minutes later it looks crystal clear!
It really looks like kinda air bubbles are floating on surface and sticking together or dust....
I tried to capture this in clear glass but its instantly gone.
( previous fill was same? Bad Dichlor ? dry Acid ? )
Just feel like dumping water yet again, frustrating
I will pull microscope to this tomorrow
Thank you for suggestion
-
Thx, My Manual said at least 8 hours minimum
"Spas with adjustable filter cycles should be operated a minimum of 8 hours a day to remove suspended particles that may exist.( 4 hours per a 12 hour period)"
So lol, I figured 24 hrs will be better Hopefully I didn't destroy anything in first week of owning spa lmao!
-
1 hour ago, CanadianSpaTech said:
Does the spa even have a small circulation pump that is supposed to run 24 hours? Or does it use the main 2 speed pump for filtration and heat? If it uses the main pump duration should be set at 2 hours per 12 hour period 2 times a day = 4 hours out of 24.
@canadianspatech
2 x 2 speed pumps it, uses low speed.
Really I had it running for 24hrs ... For a week
Is 4 hours really enough ?
Thank you
-
Tub was set to 100F
Circulation set to 24h
89.6 outside and sun beating on it ... I wonder if that's the problem.
Thx
-
Hi Guys,
Fresh fill... Store tested water and said to add 9 caps of Dazzle TH+ over 9 hours. 3x3Done that now water is cloudy.
Tested CA and Im at 105 ( ColorQ )
Strips show range of 100 as well.Level tested prior to adding the TH+ was 98, tested at the store.
I cant believe that 9 caps increased only by 7 points and the cloudiness
What is going on
Im color blind so I cant use Taylor kit strip was read by a friend
Thx
-
Dude you need to msg me your paypal so i can send you some beers... You are like personal hot tub wizard
Will that high chlorine kill my tub lol ?
-
So the store told me to add ... 59 gms of chlorine to bring it back up... I did so about 3hrs ago... And strips and taylor test of the scale still 10ppm+
I think I will run Ahh Some tomorrow and dump it, and start fresh... Should I skip aqua finesses I guess ?
-
Latest results
TDS 400
Chlorine TA 0.1 Free 0.1 ...
pH: 7.9
TA: 124
CA: 121
Po: 1000ppb
I added a little bit more pH down just now.
But water looks like this at the top after running jets... Without jets it was pretty clear
-
Thx, water cleared up but it seems little foamy, very fine white foam around edge of tub
Here is virgin sample of my city water after whole house filter. ( catalytic carbon )
Free Chlorine 0.08
Total Chlorine 0.08
Combined 0.00
pH 7
Hardness 53 ppm
Alkanity 95
Cyanuric Acid 5 ppm
Phosphate 1943 ppb
-
I have ColorQ on hand, will get Taylor
FCL 3
TCL 3
pH 8.3
ALK 143
CA Hard 133
-
Hi Guys,
New Tub - filled with city water.
Tub has ozone and uv
Water was crystal clear, but out of balance.
Went to pool store to test.
Chlorine Total: 0.1, Free: 0.1
TDS 200ppm
PH 8.1
TA 105
Ca 93
Po 2500 ppb
They said to add 140 Grams of TA+
34 grams od pH-
100 grams of TH+ split in 3 doses every 3 hours
59 grams of chlorine
And. 1.28L of Phos Cleanse ( about to add it )
But water turned cloudish no longer crystal clear, should I dump it and start again
Thx
-
Thx, would I use that with current fill... Then dump water and then fill new.
Or should I dump water, fill fresh use it, dump and fill fresh ?
-
Hi Guys,
So I started tub 2 days ago (new) today I found bunch of white like paint splatters inside the tub.
They literally look like paint splutter or sticker left behind, when I try to rub them off they feel rubbery maybe even sticky.
Any suggestions.
Thx
-
yes I have AquaNova UV/Ozone.. there are two little vents for it... one is bubbling but other is continous stream, i think according to manual both should have bubbles
-
Hi Guys,
I just noticed that I get a lot bubbles from one jet but other has very little if any, when I touch it with a finger I can feel flow but no bubbles.
Air lock ?
Thank you
-
Hi Guys,
I did the initial "initialization" with filters installed, should I remove them and re initialize/purge again ?
Thx
Scratch repair ?
in Portable Hot Tubs & Spas
Posted
Sorry you mean run nail in the arrow direction ?
Nail catches going in either direction.
interesting way in finding cracks, how does that work ? Like a ramp effect for one side ? And catches for other