Leaderboard

Here would be the test to find the bad relay. (After you replace burnt black wire connecting the 2 relays) With power to the board and heat light solid place one probe on the left coper heater relay and the other on the open tab on the top black relay... do you get 240? next test at where the black wire connects to the top relay... do you get 240? next test where the black wire connects to the bottom relay.. do you get 240? then test the open tab on the bottom relay... do you get 240V. Follow the power and where it ends is where the bad relay is. You can do all that but in reality I would be replacing both of the relays. https://www.youtube.com/watch?v=oiQBBHtejMA&t=294s