Nilrem882 Posted January 17, 2015 Report Share Posted January 17, 2015 New to the Forum. Looking for some help with a CalSpa 2000. Spa is running in a limited capacity. I am getting an "SF" error when turn on the jets only when the topside selector is active on the "Dome Jet" option, but not the "Wall Jet" option. I have put in a new filter and checked for blockages on within the tub. Can't seem to figure out what is causing this issue. Also a question that I have about this selector switch.... Should I be able to change between Dome or Wall jets while the tub is running? I remember being able to do that over the summer but now when the jets are running, the selector is frozen in position. To change from Dome to Jet, I have to shut of the jets then make the selection. Is this normal? Any insight will be appreciated. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.