sharkbaite Posted February 2, 2013 Report Share Posted February 2, 2013 I have a Balboa VS501 system that was working fine till last night, now when I turn on the main breaker for the tub the display reads the temp in a scrolling 80-104 up and down, over and over again, tub will not turn on, lights, pump nothing will work except the display scrolling the temp. Even if left on nothing happens... Any suggestions and or advice... Quote Link to comment Share on other sites More sharing options...
BullfrogSpaParts Posted February 4, 2013 Report Share Posted February 4, 2013 Sounds like your topside control is the most likely problem. Turn your breaker off and try unplugging / cleaning the connections and replugging the topside into the board. Let us know if you need more help. You can also check out our troubleshooting guide here: http://bullfrogspaparts.com/troubleshooting-guide-for-bullfrog-spas/ The Spa Master www.BullfrogSpaParts.com Quote Link to comment Share on other sites More sharing options...
BullfrogSpaParts Posted February 4, 2013 Report Share Posted February 4, 2013 Sounds like your topside control is the most likely problem. Turn your breaker off and try unplugging / cleaning the connections and replugging the topside into the board. Let us know if you need more help. You can also check out our troubleshooting guide here: http://bullfrogspaparts.com/troubleshooting-guide-for-bullfrog-spas/ The Spa Master www.BullfrogSpaParts.com Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.