MGR38 Posted February 21, 2010 Report Share Posted February 21, 2010 I have a 2004 Sundance Altimar 850 series. I just installed a new board. I noticed the jumpers in different spots on the new board. My question is can someone tell me what jumpers should be in what numbers(for the P9 & P19 spots)?? This would be a REALLY big help!!!!! Thanks Quote Link to comment Share on other sites More sharing options...
CatalinaSpa2007 Posted February 22, 2010 Report Share Posted February 22, 2010 I have a 2004 Sundance Altimar 850 series. I just installed a new board. I noticed the jumpers in different spots on the new board. My question is can someone tell me what jumpers should be in what numbers(for the P9 & P19 spots)?? This would be a REALLY big help!!!!! Thanks Specific jumpers will be used depending on your spa's electrical configuration (120v vs 240v or 1 pump vs 2 pumps etc). Are you replacing your existing board with an exact replacement? If so, then one would expect the jumpers to be the same for both boards. Also, on my spa a diagram of the board & jumpers is located on the backside of the main-board box cover. You might also find the diagram in your owner's manual. Good luck. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.