Search the Community
Showing results for tags 'thermospas'.
Found 2 results
-
I wanted to put this out there since it was very hard to find what a hot tub should cost. A Thermospas Chesapeake 200 with 22 jets, 1 pump, cover lifter 200, and steps. All in w/tax was $9,888. I found it very strange that an industry, can operate in this day without transparent pricing.
-
I have an early 2000's ThermoSpas 1900D Concorde model that will not turn on. The pump was bad, so I replaced the 2-speed pump (AE 23020-4) and when I did, only the low speed worked and it would shut off when it went to high speed. I tried switching the low and high speed wires, just in case I may of had them backwards. When I did this, the pump tripped the GFCI breaker instantly and then tripped the main breaker. When the pump was unplugged from the control board, everything else would still power up and work (blower, lights). I switched the wires back to the original configuration to at least get the pump running so it would circulate the water and when I did, nothing worked. Now, even with the pump unplugged, there is no power to the top-side control. I can hear the pump click on, but that is it. Is there a possibility that the transformer could have blown and needs replaced? It is a Cin-Tran 30274 transformer and the spa pack is Balboa.
