edgraham

OK, So no burn marks on the board. it looks clean. When I disconnect 15/16/17 it does not trip. If I connect 16/17 it trips after about 5 seconds. Did not try the j5/6 thing. I forgot...lol But with 15/16/17 disconnected it runs fine with Pump 1 out of the loop. I am gonna give it a once over.

Verified the old GFCI worked so I put it back in. Does not trip with J5/J6 off. Trips when they are back on. J 6/7/8/9/10/11/12/16/17/18/19/20/21 do not affect if it trips. I do not have J13/14 When I disconnect J15 it does not trip immeadiately. but after about 5 seconds the breaker trips. When connected it trips immeadiately.

Just disconnected the pumps one at a time and no change either.

Disconnected the heater. Disconnected Heater in and out. No change. Still trips breaker. I wish I knew what this 560 was. It flashed up so fast that you blink and you miss it. I have checked all the wires on the board for shorts and cant find a damn thing.

Will check that this morning and yes, I have a neter and know how to use it.

So My GFCI braker keeps tripping also. I tried replacing the breaker and nothing changed.

I came home the other day and noticed my hot tub had no power, or appeared to have no power. I went and checked the breaker and it was fine. I reset it just to see if the hot tub would power up, and "560" flased on the readout and nothing else happened. It completely dead with exception of the 560 and i cant find anything about it. Retailer where I bought it wants $150 just to show up.