calsap

I was looking at the chart here. https://www.spaandpoolsource.com/sundancespastemperaturesensordiagnostic.aspx The spa had been off and it was around 70F outside. I think the readings were around 35kohm for the temp sensor and 30kohm for the hi limit.

I checked the resistance on the temp sensor and the high limit and they both checked out. The filter was out too. The screen doesn't just show dashes. The am/pm/lock small text were flashing. Thanks

Hi All, Need some advice. My 2001 Sundance Capri gives a watchdog error after being off a few weeks. It gives a watchdog error right away on startup. Dashes and other text are flashing. I opened it up and found mice had eaten through the temp sensor wire. I wired it back up. Checked the capacitors and they look fine. I figured fixing the wire would fix the issue. Flo sensor and hi limit are fine. Turned it off and on a few times and still the same, even waiting overnight. The error and the chewed wire seemed like too much of a coincidence for something else to be the issue, but the error won't go away. Any thoughts before I change the capacitors anyway? Thank you!