Mo75

Problem solved. This video explains what was up: https://www.youtube.com/watch?v=rsQmR3CuL7k The LED light wires were just loose. And as anticipated, the dudes did not wire up the speakers in the right spot 🙃 Easy fixes all around, so we are in full enjoyment mode 😎

We just purchase a Hot Springs Triumph 2022. Our electrician wired it up yesterday. Everything seemingly worked fine except for the Bluetooth speakers and LED light in the hot tub. I think this issue is largely due to the dudes who performed the initial setup didn't do so correctly. That aside, we thought things were working fine until we noticed the 20 amp tripped overnight. We reset this morning, but it tripped again about 15 minutes later, and the 15 minute mark seems to be the interval for tripping (one interval was actually 30 minutes and we got excited, alas). Interestingly the jets and moto massager seem to work and it is heating up (we are at 99 degrees now). Also, except for the internal tub light, the other lights work. We've had some rain today and might pop open the breaker to make sure the wiring is correct. We are looking at the schematic and see what should go to the 30 and 20 wire-wise. Any suggestions? We already contacted out dealer about the Bluetooth speakers and the LED not working. We will likely schedule a tech to come out to help us with those. Thanks in advance!