[2000 Sundance Cameo "locked" Help!]

On 5/15/2017 at 6:45 PM, Jonz said:

After reading it could be because of improper electrical wiring I check out the J6 sensor clip where I recently worked. One of the pins wasn't pushed in and connected all the way. After pushing it in and powering on the lock was gone. All fixed. It doesn't make sense that it worked all week and just turning the breaker on and off caused this but it works so im Happy!

Which sensor do you mean? I have the same keypad lock problem

[Circulation Pump Gets Hot And Stops]

hi, although the thread is old, I want to join.

I have the exact same pump in our Sundance altamar, and today got the FLO error.

Measured the mains voltage at the pump connection and its ok, pump not running. Only little noise coming from inside pump due to the mains 50Hz frequency (I am in Europe). I measured the capacitor and it seems ok. I removed backside plastic cap and turned the pump clockwise with a screwdriver, I can turn it but it does not continue to run. The only thing I can feel is that when I try to turn counter clockwise, there is force from motor which prevents turning, but clockwise it does not run from itself when I turn it manually, no matter how fast I try to spin. There is little force needed turning it with screwdriver, not much but you can feel resistance.

Is the motor to be replaced, or is it worth doing any maintenance on it?

thank you!