T MORGAN

Did you ever get the ones made out of ABS

Just got word from Hot tub outpost they should be back in stock next week. They still will not sell the components, so we have to by the whole jet body. They do not sell a wrench for installing these so I made my own if anyone is interested. I used a connector which would connect two pieces of 3” exhaust pipe so the OD is 3.25” which is what you need. I then marked it out and cut all the knot he’s out with a die grinder. Pictures attached

That should be the drain hose for the filter housing. It could be leaking from the vent on the cap or the rubber oring on the main filter cap.Also if you recently did a filter change sometimes they have a plastic washer that goes between the filter and the cap if that is not there it will cause it to leak. Tim

215-7368 Wall Fitting (Clear Plastic Ring Threaded 711-6500 Gasket for wall fitting 711-7330 Gasket for Jet Body These are Waterway Plastics Part numbers. As stated these parts are the components to the whole jet body. Usually the Jet body itself is not damaged and it is the clear plastic ring that gets damaged or crakes and leaks over time. These are good numbers from waterways but most spa dealers do not list them. I am sure if a dealer would call and give waterway these numbers they would be able to order these components. Tim

Nothing from anyone on my end TIm We need to fine a dealer for waterways that will order these parts for us. Will work on that next week

Ok I talked to waterway today on the jet. They did have the number CC2107368. As we know that is for the complete jet body with the wall fitting. I assume your jet body is still good like mine and you just need the clear plastic piece that threads into the jet body. It turns out that we can just order components for this jet body. Below are the component parts and numbers that I was supplied. 215-7368 Wall Fitting (Clear Plastic Ring Threaded 711-6500 Gasket for wall fitting 711-7330 Gasket for Jet Body Waterway Plastics will not sell to the public of course that would be to easy. Put a call into Coast to see if they would order them from Waterway Plastics got voice mail and waiting on a call from them. Also working with a company Blue Water spas in Michigan and they are trying to track them down for me. Tim

I am going to contact water ways this week and see if they have anything that wii thread into that jet body

I am looking for the same jet for 6 months now and I am being told that they are back ordered by my vendor hot tub outpost. Also called Coast directly and was told back ordered and will not be available till the end of the year. Anyone that can help me acquire one of these jets i would appreciate it. Cold weather is coming real soon and need to get my spa repaired. Anyone have any luck gluing this clear jet. Jet Part # CC2107368