Jump to content

darkwin

Members
  • Posts

    6
  • Joined

  • Last visited

Everything posted by darkwin

  1. Hi, After learning some C programming my 1st version of Hawk Control. When the program has started, the data traffic between the keyboard and the controller is output on the console. The set button can be locked by means of a switch. Since the keyboard and control are constantly exchanging the same data, there is also a switch that suppresses duplicate data. What is still missing is a web interface to call up and control the data on the mobile device. You can find the c program here. https://github.com/SvenPausH/Hotspring-Hawk Remember I have never programmed with c before. The program code can certainly be made more beautiful. If anyone feels like it, they are welcome to work on the project.
  2. Thank you, yes this is whtat i need. Thumb up
  3. Yes thank you that should be enough to control my pool via WIFI. You make my day. Thanks for sharing your knowledge.
  4. Hi, I've seen a lot about other devices. It's a great community in the homematic field. I was hoping to get to know a few in this area. Unfortunately, my knowledge of microcontrollers is not that good. I measured J9. Blue 3.9V Yellow 12V green 0.06V Red 0V (gnd) black 3.9V white 0.06V
  5. Hi, yes I know there is no wifi controller. So I would like to try this with an arduino. I would like to know how the HEAD Control communicates. Is it i2c? Does anyone have the pin layout of the connector?
  6. Hello, I have a hot spring hot tub with a Hawk 76840 control box. I would like to control the hot tub via wifi. Does anyone have any further data on the control box? I think there could be a way to connect an Arduino board to the control panel? Does anyone know how the control panel communicates with the controller?
×
×
  • Create New...