Hi Guys,
So i replaced the board on my antique Qcaspas Ruby+ with a Balboa 52531-03.
When I turn on the pump jets work but it turns off after maybe 10 seconds OR doesn't turn on at all. Pump is 2yrs old. If I click Jets button I can hear pump/board click but that's it. Poured my heart and soul and moolah into fixing this jalopy. See troubleshooting vid: https://www.dropbox.com/s/0fq9d161d91wu9e/0620180824.mp4?dl=0
I also replaced the heater and that appears to work. I also get a Dr code indicating flow issue but I drained the tub to rid air locks so don't expect that's accurate. I also released water by pump connections to see if issue was there . Board was originally replaced as terminals blew/short circuited with a temperature wire. I'm baffled how. Bad luck i guess.
Any help appreciated.
Thanks.