[Hotspring Moto massage fault - no air]

On ‎12‎.‎10‎.‎2017 at 11:00 PM, Hot Spring Official said:

I do recommend checking out the air control valve to that seat. It's likely that you have a misaligned piston in the valve or an obstruction that is preventing air pressure from driving the jet up and down.

Hi again. I have checked the valve,and compared to the valve next to it,it looks good. When valve is removed,there is no airflow in the "valve hole" no matter what position the Smart Lever is in. 

Any other tips?

[Hotspring Moto massage fault - no air]

Thank you for that. Will I get to the piston by dismantling the valve from the top..? Would appreciate it if you could explain closer how I get "under the hood" 

/Paal

*EDIT*

Found a How-To online. Will try tomorrow.

[Hotspring Moto massage fault - no air]

I have a 2012 Hotspring Sovereign. My double Moto massage jets has stopped going up and down, and I have narrowed the problem down to the air flow in the moto massage compartment. No air comes out of the nozzle in the Moto Massage compartment.

I have already gone through the following steps:

-Changed the Moto Massage jets ( vertebrae tubes)
-Changed the air hose with manifold
- Turned all control valves in different directions
-Cleaned filters (Tri-X)
- Run the jets with filters off for a couple of minutes
-Checked the air inlet in the service compartment
 

All other jets works fine and are stable

 

Any suggestions from you??

 

Paal