milleda31

Recently discovered the my circulation pump on my Pebble Beach had stopped. This is a 24/7 pump. I opened the control panel to check fuses and found what appears to be a wire that overheated near the 30A fuses. The control is a Balboa EL 2000 TC Mach III Please see this picture for specifics. Looking for ideas on what may have happened. https://www.flickr.com/photos/92167423@N02/15275748209/ Thanks in advance.

Greetings, I have a recently acquired 2007 Clearwater Pebble Beach Signature model spa. The spa has four total pumps. Three of the pumps are Waterway PF-50-2N22C and the fourth is an always on circulation pump. My question is regarding the three Waterway pumps. I believe these are two speed pumps? The literature on the Clearwater website indicates that they could be either one or two speed. When I activate the pumps from the top side controls it appears they are only one speed. They turn on and off with single pushes of the button. On/Off. There is no On low/On high/Off. Is this normal. Can these pumps be made to operate in two speed mode. The literature seems to imply that they can. Thanks in advance for your response.