Hi all
I recently got a hot tub from a friend of mine and the pump is not coming on. I have checked the power source and everything is good.
what it is doing is when i turn on the main power to the hot tub you hear two clicks one right after the other coming from the circuit
board. when you go to the controls and try and turn on the pump all it does is make a click noes in the circuit board. i have checked the
fueses and there is one blown fuse and it seems to be the main 30 amp fuse in the top left corner of the curcuit pannell. not sure what it
serves. the heater is working fine and the lights are working only thing that i cant seen to get to work is the pump motor. so i took the
motor off and just hooked it up direct to the power source and it is running fine so it rules out the motor. It seems to me that there is something
wrong in the circuit board. also i took the ozone of and took it apart and it was completely burnt up but pump still doesn't come on when
i have that disconnected. also do you have to have water in the spa to make the pump turn over like is there somekind of sensor that
tells it not to turn on when it is dry. also i am not getting any kind of error code to help. . . sure hope someone has an idea for me.
Thanks
