BIG PAPA

Top side or the panel itself?

Ok, So I took the motor to a repair shop and found out that it works fine. Hi and lo speed. What else could the problem be? Its a mini-max control pack Could it be something in there? When I turn on the hi speed and the motor stops the display asle says "FLO" Hopefully this info gives the pro's something to work with. Thanks

Ok. As soon as it stops raining enough to go outside again I will check the switch( as long as I can find it). and then Find a multi-meter and test the voltage. I'll report back soon. Thanks again

Sorry, Its a 2 speed pump. Its an aqua-flo ps2e 240v, i have traced power to the wires all the way to the motor. Low speed works fine. when I turn it on to high speed I get nothing. There is power at both red and black wires at this point. But the motor does nothing. No noise nothing. When on low speed there is only power to one wire at the motor. Well hopefully This is the right info. Does the motor need to be rebuilt or replaced? or is there something else wrong?

thank you for the tips. I will try these suggestions right away.

Ok, So I think I'm supposed to have a two stage pump. I think only one is working. Both stages worked when I unhooked the spa 4 yrs ago. What could be the problem with it? Is there a way to test the pump and/or the control box?

Well i stuck a pipe cleaner into the end of the preasure switch and the flo code is gone but now only half of my jets turn on. No pressure at all on the jets that dont work. Any idea? could it be part of the two stage pump inst working? or control box? HELP!!!! AHHHHH!! Darn toys...Oh yea, Btw Its a Strong Spa Antiqua Gold model

Hello all! I'm a new guy. I also have a hot tub. Only problem is , is my hot tub isnt working. I bought it about five years ago and ran it for about six months and then had to disconect it. I re wired it last night and filled it with water. When I put the power to it, it's supposed to turn on and go through a purge period. Well it didn't. All it says is FLO and flashes with the temp. If I push the jets button it will turn on for a second maybe two seconds and then stop. I have taken out the filter and tried to run it without and still does the same. when the pump comes on water does come out of the jets. Anybody have any ideas?