dmaclaren

I can't find this part anywhere on any site for hotspring parts. It looks like it's a pressure regulator or partial check valve. I have found that the 1.5" pipe goes to the Water fountain. for sure, but I don't know if it feeds anything else. There is a small stream that comes out of it when the fountain is off but flows full steam when it's turned on. Does anyone know if it feeds anything else? Flow is left to right.

Okay this is odd, Tun on deck and can only see it leaking through the gap in boards roughly in the spot under the recliner seat WEll filled it up and it leaked out like mad. Filled it up, cycled the pumps and jets and no more leaking. How odd is this, what could have caused the leaking to stop using the jets?

does anyone have a plumbing diagram. I have a bottom leak that is about 1.5 - 2 ' in from the front of the unit in the middle. THe unit drains but not 100%, the well int he middle is still full.I am not yet able to get it out and turn on side, just atrating out there to see if anyone has the diagram and hs had similar issue

does anyone have a plumbing diagram. I have a bottom leak that is about 1.5 - 2 ' in from the front of the unit in the middle. THe unit drains but not 100%, the well int he middle is still full.I am not yet able to get it out and turn on side, just atrating out there to see if anyone has the diagram and hs had similar issue

I am having heat issues too. I found that I am getting about 30 - 37 volts through the heater relay board. I find it odd that I am getting that amount. I would assume that it's the 240+- or 0. Does this seem weird? I believe my only resolve is a new heater relay board. I do see the Heat (red) light and the green one too. Thoughts? Thanks, Don