Topper

Hayward control box Inside control box

I know the stain starts directly in the path of where I dump the salt and from there they lead down to the pool drain (so I think that salt is the culprit.

My plaster is still in good shape after 5 years but has some darker shades that have appear over the years which I suppose is from a lack of good pool maintenance. Is there a chemical that when added to the water will bleach it back to an even shade again. And, if not what could be done to clear up the blemishes. Thanks in advance for any advice, Topper

The add says "Mad in USA" ... If they don't say in plain letters "Made in USA"...I would continue to be leery. This is called deceptive advertising!

I am looking for some advise about our Hayward 3Z62 control box. The wireless remote stopped working this past summer (5 yrs old). The batteries were non-replaceable so we had to throw it out. Anyway, that remote was the only way that we had to turn the spa blower on. After throwing it out I tried every button on the control box but could not get the blower to turn on. I replaced the fuse but I still couldn't get the blower to turn on. I am not electrically savvy so I called a repairman. The repairman tested the electric current where the blower was attached and he said it was only supplying 110v and the blower was 220v ??? It was working last year so I do not understand what could have happened to the control box...??? The repairman moved the electrical wires from the "blower" spot to the "pool cleaner pump" spot which was not being used and was supplying 220v. The blower stared working again. Now, the blower is assigned to aux1. Here is the rub: On the control box, My "pool/spa lights" button stopped working and the button assigned to "spa" stopped working too. Some of the buttons still work, like the "heater" button. Has anyone experienced this before? Thanks...