Hotsprung
-
Posts
23 -
Joined
-
Last visited
Posts posted by Hotsprung
-
-
We have an arbour over our tub and I have had some panels made from the material used to make sail covers. Lots of colours to choose from, attached to the Arbour with shockcord and eyelets in the panels. Waterproof and the material has a 15 year guarentee. Excellent for both privacy and wind protection.
Source through a local sailmaker.
-
Although I'm no spa expert, and cannot comment on the merits of the solution, I have been caught out this way before on other projects. I would buy new wood and make one end 4" amd the other end 3". That way you allow for you pitch and can still get the gravel in. It will also allow you some depth to compact the gravel if needed, improving the overall support.
My hotspring install instructions included details on the load points on the underside of the tub. If you can source it, your manufacturers documentation might do the same.
-
The more I think about it, the more I'm inclined to let it go and talk about compensation. I don't tend use the water feature and if I do, its not on Green or yellow. I guess having spent so much on the tub in the first place I really want it working as it should. I suspect I'll talk the the dealer and come to an arrangement!
-
I reported a fault with the green LED in the water feature on my 2010 Sovereign to the dealer last week. They attended today and have confirmed that the fault is with the LED rather than any control.
The rub is that the LED is not in the water feature but about 12" down inside the cabinet and access is difficult. They have given me 3 options:
1: Do nothing - not really an option to be honest;
2: Cut a small access hole in the side, effect the repair and replace the cutover with new "Everwood" or;
3: Take the whole side off the spa and effect the repair replacing the side of the spa in it's entirity.
The tub is less than a year old and not fixing it is not really an option. The small panel with look rubbish so the solution is to replace the whole side (if thats what I understood his option to be over the phone).
The dealer, who is first class, is happy to do what I want. So, my questions are:
1: Is taking the side off the spa a big issue?
2: Will the repair compromise the structure of the tub (am I setting myself up for a lifetime of related issues)?
3: Are the Everwood panels secured from the inside (will I end up with a row of screws in the replaced panels)?
4: The tub is outside but the side to be replaced doesn't get significant direct sunlight, will the replaced panels show up significantly?
Its funny they didn't give the option of tipping the spa up and going through the foam from the bottom to facilitate the repair? Seems this would be an easy fix also?
Funny, I did think that but assumed there was a good reason. Thanks for your feedback both.
-
I reported a fault with the green LED in the water feature on my 2010 Sovereign to the dealer last week. They attended today and have confirmed that the fault is with the LED rather than any control.
The rub is that the LED is not in the water feature but about 12" down inside the cabinet and access is difficult. They have given me 3 options:
1: Do nothing - not really an option to be honest;
2: Cut a small access hole in the side, effect the repair and replace the cutover with new "Everwood" or;
3: Take the whole side off the spa and effect the repair replacing the side of the spa in it's entirity.
The tub is less than a year old and not fixing it is not really an option. The small panel with look rubbish so the solution is to replace the whole side (if thats what I understood his option to be over the phone).
The dealer, who is first class, is happy to do what I want. So, my questions are:
1: Is taking the side off the spa a big issue?
2: Will the repair compromise the structure of the tub (am I setting myself up for a lifetime of related issues)?
3: Are the Everwood panels secured from the inside (will I end up with a row of screws in the replaced panels)?
4: The tub is outside but the side to be replaced doesn't get significant direct sunlight, will the replaced panels show up significantly?
-
Thank you so much Andy !
Is your Socvereign installed Outdoor ?
it is the same ? :
Yes it looks the same.
It is installed outdoors.
Andy
-
Hi
I have a Hotspring Sovereign 2010. We got it in August last year. Generally, I use it on my own, or with my wife. The children use it with us occasionally. We have also had 4 adults in it and it doesn't feel crowded.
I find it perfect and am very happy with it.
We didn't consider anything smaller and wouldn't now. If I made the choice again, I would still pick the same one.
Andy
-
I found I was putting quite alot in until I started lifting the cover from both sides and allowing the condensation on the underside to drain back in to the tub, before opening it normally. This has halved the amount I need to top up.
-
Love it. Towels go in a spa side box to keep them dry. I'm in my first winter of spa ownership and it's the best. Very theraputic.
-
So, it's under the vinyl skin, between the outer vinyl and polyethylene wrapping sealing the foam. ....normal.
Yep!
-
That's normal when on top and indicates that the cover is doing a very good job at insulating the spa.
John
I Have a 3 mth old Hotspring Sovereign. We are in the middle of the first cold snap of the winter (nothing by US standards, but still cold.
I noticed yesterday that there is frozen water under the vinyl cover. Its around the top seam and extends about 3" from the seam.
I've been studiously applying 303 protectant as recommended and I'm reasonably sure the water hasn't got into the insulation.
Is this normal?
Andy
Fab, I was hoping it was.
Andy
-
I Have a 3 mth old Hotspring Sovereign. We are in the middle of the first cold snap of the winter (nothing by US standards, but still cold.
I noticed yesterday that there is frozen water under the vinyl cover. Its around the top seam and extends about 3" from the seam.
I've been studiously applying 303 protectant as recommended and I'm reasonably sure the water hasn't got into the insulation.
Is this normal?
Andy
I'm having a tough time understanding where the frozen water is. Is it icycles hanging from the cover skirt? Can you take a photo?
Roger, It's directly under the top layer of vinyl, water has seeped through the cover stitching. It's not icycles!
Thanks anyway
-
I Have a 3 mth old Hotspring Sovereign. We are in the middle of the first cold snap of the winter (nothing by US standards, but still cold.
I noticed yesterday that there is frozen water under the vinyl cover. Its around the top seam and extends about 3" from the seam.
I've been studiously applying 303 protectant as recommended and I'm reasonably sure the water hasn't got into the insulation.
Is this normal?
Andy
-
Whoa.... My head hurts!
Chemtexx, have you managed to get rid of the smell yet?
-
When I'm alone, i just put it on the filter cover, and in company I have hooks on the leg of the pagoda I have built over the tub. We have loops sewn onto the towels. When it rains, I have a covered plastic tub I take out with me.
Not fancy but functional.
-
My HS dealer recommended that the chemicals should be slowly added to the filter compartment with the clean cycle running. I also leave the cover off or open for a time afterwards to allow any gases to escape.
-
I would take your time with each, don't be rushed. Certainly with the HS, check that the jet diverter runs all the seats you would want at the same time. The right tub will feel right. If it doesn't don't be persuaded, look again. We tried 2 HS models and settled for a Sovereign, I'm not disappointed.
-
It might not help much, but I have a 2010 HS Sovereign and being in the UK run mine in Degrees C rather than F.
My dealer and install tech has suggested I too can expect the water to be within 1c of the temperature set. Given that there are more degree F's in a degree C, my perception is that 100F against a a setting of 102F is within the tolerence I would expect.
-
Excellent. The same happened to me with Hotspring.
Been chatting with the deal for 8/9mths. I explained what I wanted and what I was willing to pay and told him to call me when he wanted to do the deal. 6 weeks later, he called, we did the deal.
Love it!
-
I wouldn't have bought it. Too many question marks!
Good decision.
Start looking for another.....
-
Hotsprung, if they are the Tri-X filters, they are designed to be washed in the dishwasher on the rinse cycle/no heat dry. The end caps were designed not to catch the debris, and the ceramic mesh maintains its shape better and can handle the pressure without tearing better than the tranditional fabric filters.
Thanks for the advice. I don't have Tri-X filters yet, what I have at the moment is the paper ones supplied with the tub. Most of the significant debris, tree flower petals etc comes out but some stuff is remaining in the internal crease of the paper. I'll watch and see if it becomes a problem.
Cheers
-
How studious do you have to be when cleaning your filters. My Sovereign is 3 weeks old and I have been cleaning my filters with hose and non-pressurised jet attachment. The process removes any discolouration and as I squirt water into the folds some larger debris is washed out. I'm using the pressure of the water to open the folds.
Should I be opening the folds by hand and getting every last bit of stuff out, or will I be ok with what I'm doing?
Okay To Be Sweaty?
in Portable Hot Tubs & Spas
Posted
Whilst I can't enforce it, I ask that all friends who use our tub to shower before they visit. We, including the kids, make sure we are "fresh" before we get in....