I have a Hot Springs tub that is not heating. It is 230 V power, and everything else works. Circ pump, two jet pumps, and light. Just no heat. It is a No Fault 6000 heater, the control is an IQ 2000 system. On the IQ 2000 board, there are three LED's, one says LIM OK and is green, one says HTR ON and is red. The last says CONTROL UNPLUGGED and is not lit at all. I believe this spa has a feature where the power light flashes if the hi limit is tripped. It is not flashing, and never has. I have reset the breakers, but they did not trip. I found the reset button on the heater and reset it, but no luck. Anybody know what the lights mean? Or how else to diagnose the issue?
Thanks,
Mike