Jump to content

kitisi

Members
  • Posts

    7
  • Joined

  • Last visited

kitisi's Achievements

Newbie

Newbie (1/5)

0

Reputation

  1. I own a older jacuzzi brand tub the jets are simple they just direct the water flow, I have seen on newer tubs jets that pulsate etc Are their jets that i can purchase that will replace the original ones to this effect. Any suggestions
  2. I own a 10 year old Jacuzzi hot tub and I am sure the ozonator does not work any more, any suggestions on a replacement OZ generator thats easy to install and priced reasonable thanks in advance
  3. I just installed my hot tub on a cement slab and its too open, We don't want an enclosed building but was interested in a trellis design open roof etc, anyone know of any good pictures or locations of plans to give us some ideas,
  4. first I have read here that the total alkinity should be 80 - 150 then I saw 160 -200 then 80 - 120 what is the best range and the tareget number I should shoot for? The question with bromine is I have an ozinator, i ws told this is good so you have to use less bromine, however the test kits all test the same, if you use less bromine why would ou then calculate a lower number for the bromine levels, confused in Missouri thank for any help
  5. i will try that thanks, one othe r thing my alkinity was at 170ppm when i checked it was a ph of 8.5 last night I used spa down got it to 150 will do it again, I think I read somewhere where if the alkinity is tow high then bromine won't work is this correct?
  6. My tub laid dormant for 4 years and I just fired it up last week and Im having a brain fade in regards to a chemical problem, I put in the reserve packets (I use a bromine system) and I have the floater going opened up more than in the past. its been over a week and I just tested the bromine level and it shows almost 0. I have an ozinator, how do I know if it is working, how can I check it, also i use bromine tablets and they are 4 years old do they go bad, they appear to be in good shape and smell like they always did. Any help would be appreciated.
  7. When my filters are dirty i put them in the dishwasher laying on the top rack, ( No dishes in dishwasher) and use the standard detergent, i run it on the heavy cycle and stop and rotate the filters every 5 or 10 minutes, they get real clean and its simple, just a comment
×
×
  • Create New...