DMA120

That would be great, Thanks! Darren

Trying to combat a slow leak in a tub and am hopeing someone might have a plumbing diagram for this tub? It sure would be helpful Thanks Darren

Hi everyone! First post here. I picked up a 1995 Hot Spring Grandee for $100 a few weeks ago and i knew going into it that it wouldn't be perfect and I would have to do a bit of work. The tub has been filled and flushed per the instructions I have read on here. As far as I can tell the tub and plumbing does not have any leaks except for the main diverter valve on the #2 pump which is accessible and is only a very small drip when the pump is running. The leak that concerns me is is one that i think is the shaft seals on the pumps. Beneath the pumps there is always a small puddle of water that will drip below the deck that the tub is on. I have checked the plumbing all around the pumps and it is all dry, no leaks with the pumps on or off so I'm leaning toward the shat seals being bad? To the best of my knowledge the pumps are original to the tub so the seals would be pushing 15 years old.. how long do they normally last? How hard are they to replace? These are the version 2 pumps. Thanks Darren Indiana