Spatech31

Took side cover off today,I have two heat sensor that go into the heater,Im assuming one read temp coming in and the other tells when to turn heater on and off,my sensor part # are 30344. also has M7 on it.Hoping some comes across this give me some help here.THanks There is no way to raise temp to 107 + . The spa control is locked out at 104 because it has been legislated that no spa reach over that point.I have investigated this issue many time and the answer is always the same that its not possible.

My answer to your question is dont do it. All the air blower is going to do is cool down the water as it draws cold air under the skirt and it will cool down quickly,,

Your spa is designed to put the heater into stand by mode when both pumps are running to lower amp draw. This is not a problem it is the way the spa pack is programmed. There may be a way in the low level programming to override this, but that would mean you would have to increase the amperage supplied to the spa..