Hi all, newbie with a 2001 Hot Spring Landmark that developed a leak recently, which, now I found out might be self inflicted. THe moto massage stopped working, and when I looked inside the little blue hose had split, replaced that and still nothing, so I proceeded to try to "blow" back through the nipple where it connects in the back of the housing, still didn't work, so replaced the entire "spine" in the moto, now that works great, except losing 3-4 inches of water per day, figured out it was that corner and pulled some boards, starting digging the foam (followed the wet foam), and found a "huge hole" with water pouring out on the back of the moto housing, and after realizing that this was the "back side" of the air hose connection, temporarily plugged the hole with some putty, water stopped, no more leak, no more moto massage either. I have looked everywhere under there for an "airline" that should maybe be re-connected to this area (with maybe a new nipple?), but after digging almost 18 inches in every direction, it is nowhere to be found???? Could anyone give me some direction where to look or perhaps where to get a plumbing schematic or where this "originates" from? At this point, I think I may have to run a new one??? Any advice or experience on this mess would be appreciated.
