dave47165 Posted November 23, 2014 Report Share Posted November 23, 2014 Ok. here's my issue. I have a shoreline spa it has 2 2 speed pumps. I just replaced the spa pack with a Hydro-Quip water pro Which is a Balboa VZ511 and a new topside panel. this was a direct replacement for the balboa pack that shoreline originally used. Plugged everything in exactly the way the old one was plugged in. to start with, the left side jets did not work.(The pump comes on and will work on both speeds but no water comes out) the right side of the tub the jets came on fine and worked great. Now, It will circulate and heat but whenever I turn the jets on the right side that was working fine, they will come on for about ten seconds and then shut completely off. Any ideas? I am about ready to offer this thing up on CL and start over as we inherited this money pit with the house. any help to point me in the right direction would be appreciated. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.