Search the Community
Showing results for tags 'tx'.
Found 2 results
-
I have developed a leak in my Hotspot TX triangle spa. I noticed the water levels dropping dramatically. So I went to investigate and found water dripping from the bottom of the spa skirting. So using that drip as a locator I removed the glued on skirting and the insulation inside to find wet insulation and staining from water. I removed all the insulation and noticed a fracture or crack and water stains in what looks to be a union or splice piece of PVC right before the tubing makes the turn to the foot massager jet. (Photos attached) I am looking for recommendations on a durable repair/replace method. I didn't know if you could just silicone the crack or maybe use some amalgamating wrap or waterproof tape or if it needs to be replaced completely? If replacement is necessary how would be the best way to go about that? Thanks for any help.
-
I have a 2007 Solana TX i got for free a month ago. It won't heat up, and to me it won't stay on long enough for it to get hot, yet the breaker doesn't trip, something isn't telling it to stay on. The ready light is constantly flashing. The manual says one of the sensors. So I replaced all sensors (Thermistor, high limit and pressure switch) still flashing ready. So I moved on to the heater. I replaced it and still nothing. So that only leaves the circuit board and the GFCI power cord. Well i tested the power cord GFCI and it trips, but it makes a quiet buzzing noise and can feel a vibration. When i hit reset it does nothing until I unplug it and plug it back in then it resets. Would that be a sign its bad?
