D7m
-
Posts
3 -
Joined
-
Last visited
Posts posted by D7m
-
-
These are the results of testing done by dealer:
Free Chlorine: 0.89ppm
Total Chlorine: 3.12ppm
Combined Chlorine: 2.23ppm
pH 8.2
Alkalinity 122ppm
Adjusted Alkalinity 98ppm
Calcium Hardness 158ppm
CYA 79ppm
I have balanced the pH down to 7.4 and the alkalinity has come down with it to about 50ppm. (Tested with Strips)
Water has been clear throughout, but I think I must not have added enough bleach after every use. The Original Clorox here in Canada does not state the %Chlorine on the bottle, which is not helpful. Thank you for your thoughts!
-
Switched to the bleach method, and have really liked the ease of use so far.
Just got the water tested at the pool store: Free Chlorine 0.9ppm, Combined Chlorine 2.2ppm.
Would it make sense to shock with bleach up to 22ppm FC?
Dichlor/bleach Method In A Nutshell
in Hot Tub Water Chemistry
Posted
Thank you kindly! I'm sorry, I'm not sure what method the dealer used.
I will lower the CYA by draining/refilling partially and will go from there.
Earlier in this thread I had read that shocking is not required when using the bleach method. Could you elaborate on that?
Thank you once again for all the helpful info!