mech65
-
Posts
6 -
Joined
-
Last visited
Posts posted by mech65
-
-
I can try but more than the middle panel would have to come off. To the left of the control panel is one pump. To the right is another pump and a dedicated circulation pump. So that is three pumps in total. The pumps and blowers run at 12 noon, each pump and blower running for a few minutes. I have never had the big pumps go on by themselves. The last night and so far there have been no false startups. If you would like more pictures I can remove more panels tomorrow and get more pics. Thanks for getting back to me.
-
Hello, I have removed the filters and lowered the temp to 80f. The voltage was 0v. When I raised the temp to call for heat the voltage was 238v.
-
Ok, I will do this tomorrow, thankyou.
-
No errors top side and temp is set at 98f. I will check voltage to heater but what would that cause pumps to start up for no reason. When I ask for more heat the circulation pump comes on unless we are using the spa and all pumps are running.
-
Hello, first post here. I have a 2012 Sundance Altamar. No problems up until last night. I woke up in the early hours to find the main pumps running on high. Tried to shut down using the topside control but they would not respond. I shut off the circuit breaker for a minute and restarted. Everything seemed ok but a few hours later the pumps were back on and only shut off when flipping the breaker. Any help would be appreciated.
Spa pumps cycling on their own
in Portable Hot Tubs & Spas
Posted
I’ll keep my eye on it. If it happens again I will check the voltage from the heater to make sure it is not on. Thanks again for your help.