JeanReed
-
Posts
8 -
Joined
-
Last visited
Posts posted by JeanReed
-
-
No Spa Guru - I dug up all my pipes and added extra sealant to all the joints by way of silicone and tape, on the off chance that there was a problem with one of them. This inlet was just one of them that I did (I redid 8). I didn't take them apart, I just added extra. They have all been sealed/stuck together with PVC glue when they were installed. This was just an extra "just incase", but doesn't seem to have done anything to help.
-
Here are the photos as promised. Not quite sure what you can see, but I tried. The pool does NOT blow air out all the time - this is what I don't understand, nor how to fix it because I'm presuming the air is the cause of the lack of suction and the reason the kreepy krawly doesn't work?
Pool not burping out air
Pool with air!
Pump and filter
Pump
-
No. It's actually rather strange - it blows out air and then nothing (no air, just water) for about 10 seconds and then some more air, then more water (no air). If I could post a video I would show you what I mean. Very odd.
-
Sorry, not on South African filters
this is the third pool I've had and none of them have had a pressure gauge on the filter. In fact, I've never seen one is South Africa. -
I'm sorry but I have no idea, nor any clue how one would measure that?
-
Hi, yes I have. Took it out and had a look at it. Its fine (not cracked or chipped).
-
I have started having endless problems with my pump. Everything is just on 7 months old - pool, pump, filter and everthing worked fine till about a week ago. Now, the pump doesn't seem to have enough pressure to work the creepy crawly any more. (whereas the creepy has been fine till now). I have checked the creepy head for debris, checked all the pipes, dug up all the pool pipes and resealed all the joins by smearing silicone over them all and it is still blowing bubbles out the outlet pipes, and not sucking at the inlet.
Note, it has ALWAYS blown bubbles out the outlet pipes (there are two) but has always still been able to work the creepy.
I have backwashed and rinsed. I took the cover off the filter and removed dog fur by hand, stirred up the sand, rinsed and backwashed again and still nothing.
Please help??
Pool Pump Has Very Little Suction
in All Swimming Pools Types
Posted
Thanks everyone for your replies.
I ended up redoing all the joins in the piping as the person who installed the pool, just pushed the pipes together. They do have rubber seals and if done correctly, they are supposed to seal tight, but he just put them together, he didn't push them together so there was water leaking out and air getting in. I have now cut open all the joins and added new joins and glued them together with PVC glue as one is supposed to do. Everything is now functioning as it should be and the kreepy is finally working. I hoped I wouldn't have to resort to this as it was a job and a half, but when everything else failed, I decided to give it a try as it was either that, or turn the pool into a flower bed. Thankfully what I did, worked!