PA Mike
-
Posts
5 -
Joined
-
Last visited
Posts posted by PA Mike
-
-
This forum is great! I have a question. Is it ok/accurate to balance at a cold water temp, as in 54 degree well water?
Yes. You're probably going to need to fine tune over the course of a few days anyway. Just keep an eye on pH, and adjust TA accordingly.
Thanks. I've got the process started. I should be up to temp tomorrow, as I have the heater on now. I let it go a few days and picked up 15 degree temp rise for free. My TA/ PH balancing has never gone very well. I may have more questions after things get up to temp.
-
Scratch the surface with your fingernail - if you get a white dusty substance then it sounds like a lot of calcium build up.
It does scratch off. I cleaned it all out of the filter canister. Now that you mention calcium, I can probably have a sample of it tested for calcium content where I work.
-
I have been struggling with cloudy water in a used spa I got about a year and half ago. I am wondering if it is due to a plumbing sealer / leak fix chemical that the previous owner might have put in.
This is just a guess, but I am wondering this because the filter housing had what looked like a coat of white paint in it. Is there something else that would put a heavy white paint like layer inside there?
Thanks!
-
This forum is great! I have a question. Is it ok/accurate to balance at a cold water temp, as in 54 degree well water?
Bye Bye Baqua Spa!
in Hot Tub Water Chemistry
Posted
I switched from baquaspa to nature2 about a month ago. That was a fantastic decision!
Any baqua spa lovers want to buy a bunch of unopened chemicals? Seriously, I have a bunch of them.