Jump to content

Blank screen / Balboa


Recommended Posts

After a harsh winter i have turned back on my baboa hot tub.

The screen is blank however still backlit. The tub did heat up, i used for a week but noticed a leak so turned off to fix the leak. Once done i turned back on. Screen was still blank but this time it hasnt heated up.

IMG_8232.jpeg

Link to comment
Share on other sites

In sleep it will only get to 80 degrees. There may be a setting on the circuit board to change the topside mode settings from SL/ECN/ST to just Standard mode. Then if the buttons still work you would be able to press the up button a bunch of times and see it you can get it up to 104 and then each down temp button press will equal 1 degree. Not perfect but might work for now. Post picks of circuit board and the schematic on the inside cover and we can see if there is a "dip" switch setting you can make to get it to ST mode only. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...