Jump to content

Draining and closing Sundance Marin 880 series for the summer


Ben M

Recommended Posts

Hi all!

I have a Sundance Marin 880 installed in December 2022. We are leaving home for most of the summer starting this weekend, and I have just fully drained the tub since I'll have no way of maintaining it while I'm away. 

Question is: even though the tub is empty, there is (I am guessing) some residual water left in the lines. My concern is that the water will stagnate and then when we turn the tub back on in a few months, the jets will push out lots of nastiness. 

I used the quick drain valve on the front - is there anything I need to do to completely remove water from the lines? 

Thanks!

Ben

Link to comment
Share on other sites

12 minutes ago, cranbiz said:

You will have stagnant water in the lines. Unless you blow out every jet and line, you can't avoid it.

So my follow up question is - how do i blow out the lines? I thought I wasn't supposed to turn the blower on with the tub being empty. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...