Rutherford Posted March 30, 2023 Report Share Posted March 30, 2023 The kids came for spring break and sun-baked noodles play (the pool only gets used when grandkids are here) caused plastic fiber debris to clog filter. Pool level rose to the deck before we noticed and cleaned the filter. Pool took overnight for the overfill to drain. Next day, we put the pool in spa mode with heat set to 104 F. It appeared to be working, in that the spa jets came on, but the temp would not rise. We turned spa mode off. Now the spa jets have remained on when the system is in pool mode. Previously, the spa jets are on in low mode when in pool mode, now they are on full. The spa has a waterfall into the pool, and of course now the waterfall has more flow. I have attached pics of the valves as they are right now, the pool system in pool mode. What is needed here to return to the right valve settings? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.