Chris2277 Posted September 23, 2022 Report Share Posted September 23, 2022 How do you go about filling in the hole that you are left with when replacing a Leisure Bay G-3 top side control. I purchased a new Balboa BP SPA Pack and a TP600 topside control. The old topside control when i removed it leave a hole that is about 14 inches long by about 3 inches wide. The new topside control is only about half that size. Any help would really be appreciated. Quote Link to comment Share on other sites More sharing options...
CanadianSpaTech Posted September 23, 2022 Report Share Posted September 23, 2022 Google... Topside Adapter Plate Lots of different size pre cut holes available. Silicone it to spa acrylic. Might have to trim the outside edges depending on the spa. https://www.spadepot.com/eco-spa-Topside-Adapter-Plate-P3128 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.