jmc859 Posted August 13, 2022 Report Share Posted August 13, 2022 I just replaced the circuit board in my Jacuzzi spa because the heating element terminals burned up. Then my circulation pump wouldn’t work, it was pretty old so I replaced it and the new one won’t come on either. Quote Link to comment Share on other sites More sharing options...
Spa Shop Rotorua Posted August 13, 2022 Report Share Posted August 13, 2022 Your going to need to provide a little more info, did you have the new board setup to the same spec as old one ? Dip switches - Programming - Jumpers etc… Photos of old and new board would also be helpful. Quote Link to comment Share on other sites More sharing options...
cranbiz Posted August 15, 2022 Report Share Posted August 15, 2022 Post up pictures of the board and the wiring diagram. make sure the dip switches are visable. Also a picture or 2 of the equipment area. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.