dcarruz Posted August 6, 2022 Report Share Posted August 6, 2022 I am setting up an artic spa bandit GP manufacture date 03/11. Onzen system. Just filled it up not too long ago for the first time after being out of service for many years. Currently the pH is high (~8) and salt is a little high (3000ppm) and I working on brining them both down by diluting and pH down chemical. After 48 hours I have no sign of free chlorine and I am concerned the onzen system isn't working. I have seen bubbles/smoke from the anode, but I want to confirm by running a sanitizer production test as outlined in the onzen technical manuals (attached). Problem is the menus for my tub seem different. I can't get to the screen to show sett - it only flips through FF and FD... I assume because I have any older version. I have FF set to 4 (highest possible setting) and FD set to 2 (highest possible setting). Any insights are helpful - thanks very much! Onzen-Manual.pdf Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.