Robert Reilley Posted June 13, 2022 Report Share Posted June 13, 2022 Have had my pool for 20 years. All of a sudden when manually vacuuming my pol thru the skimmer, the vacuum head has too much suction and is sticking firmly to the bottom liner. Is it an adjustment on the ports that is needed or a new vacuum head? HELP!!!! Quote Link to comment Share on other sites More sharing options...
RDspaguy Posted June 15, 2022 Report Share Posted June 15, 2022 It could be a valve adjustment issue, a collapsed or clogged main drain, or water behind the liner. @Pool Clown, @jimmythegreek. 1 Quote Link to comment Share on other sites More sharing options...
Robert Reilley Posted June 15, 2022 Author Report Share Posted June 15, 2022 Have both valve to pool and valve from pool at half port, is that correct? Quote Link to comment Share on other sites More sharing options...
Pool Clown Posted June 16, 2022 Report Share Posted June 16, 2022 depending on the vac head, the wheels/axels do wear causing the vac head to run closer to the floor than when brand new. 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.