Muskie Posted June 8, 2022 Report Share Posted June 8, 2022 I have a Dream Maker X400 which seems to run fine. The only issue I have is it will turn on and run approx 15 seconds every hour or so, then shut off. It’s not an issue where it’s keeping the water temp at the correct setting because in Florida the water is often warmer than the temp setting. It correctly cycles the water for 2 hours automatically twice a day like it’s supposed to on F2, but additionally it frequently turns on for only seconds many times throughout the day. I keep the setting in ST (standard mode). Has anyone else had an issue where the low speed pump frequently turns on, then turns off only seconds later, many times a day? Any idea what the issue may be? Thanks all, Muskie Quote Link to comment Share on other sites More sharing options...
RHeller1 Posted June 9, 2022 Report Share Posted June 9, 2022 On my Marquis, in standard mode, the pump turns on for 2 minutes every half hour to check the water. If heat is needed, it will heat the water, if not it turns back off. Maybe this is what you are experiencing? Quote Link to comment Share on other sites More sharing options...
Muskie Posted June 9, 2022 Author Report Share Posted June 9, 2022 Hmmmm….that’s possible I suppose. I just see nothing in the manual stating it will do this. I appreciate the info. I should probably put it in a different mode and see if I get the same results. Thanks, Muskie Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.