LeesSpa Posted February 2, 2022 Report Share Posted February 2, 2022 (edited) Hello all, OK, I have learned (mostly from reading on here) that the control unplugged light is coming on after the system power cycles, at that point no display and red blinking power light. I would love to test for this error, but not sure if there is a way...? Local tech wants me to purchase new IQ and top panel... is this my only option? Thanks, grateful to have found this forum! Lee _____________________________________________________ I purchased this tub used, but in good shape always keep in a porch since purchased new. I knew it had a bad value (behind the main controller) which was leaking, got the value replaced and no more leak. However, removing and reinstalling the main controller has caused the top side control to come on, it displays 8888, power light is solid red, for 30 secs or so then I hear a click and display goes blank, and red power light goes to blinking red. The cir pump is working and moving water. I kept a sm heater in the cabinet for a few weeks and have done the power test a few times with no change (because its winter and I saw this could be an issue). I am wondering if we missed a jumper, or something as everything "was" working. Tech says buy a new top side and controller, a lot of money. I want to be sure its actually broke... help... Edited February 5, 2022 by LeesSpa fixed sentence Quote Link to comment Share on other sites More sharing options...
cranbiz Posted February 2, 2022 Report Share Posted February 2, 2022 Are you sure that all wires got reconnected firmly and correctly? 1 Quote Link to comment Share on other sites More sharing options...
LeesSpa Posted February 2, 2022 Author Report Share Posted February 2, 2022 All wires checked for proper current and board lights up but then shuts down the top side controller. Quote Link to comment Share on other sites More sharing options...
LeesSpa Posted February 2, 2022 Author Report Share Posted February 2, 2022 Oh, one detail I forgot, if you play with the top side IQ controller cable the display comes on and shuts off, the cable seems fine and is on the pins correctly, if you slide it off and on slightly the top side lights up briefly. Quote Link to comment Share on other sites More sharing options...
Turtleman Posted October 19, 2022 Report Share Posted October 19, 2022 I have the same model, same issue......anyone have a fix or a suggestion on what to check???? Quote Link to comment Share on other sites More sharing options...
LeesSpa Posted October 19, 2022 Author Report Share Posted October 19, 2022 I ended up buying a new controller 😕 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.